ADVERTISEMENT | ADVERTISE WITH US
ADVERTISEMENT | ADVERTISE WITH US
By Aaron Waldron
LiveRC.com
New from A Main Hobbies:
www.amainhobbies.com
This is the ProTek R/C "Prodigy 610 QUAD AC" LiHV/LiPo/LiFe/NiMH AC/DC Battery Charger. A quad port AC/DC charger that can handle 6S packs, is capable of 10 amp charge rates, worldwide 110V/220V voltage versatility, with 100 Watts of power per side...the next generation of Prodigy has arrived. Backed by ProTek R/C's revolutionary customer support, the Prodigy 610 QUAD AC delivers the power you need to get your batteries charged fast and eliminates the need for an external power supply!
The Prodigy 610 QUAD AC delivers a variety of powerful, yet useful features. The Digital Power setting allows users to power additional DC powered equipment, while the Pre-Charge function gives users an opportunity to save Lithium batteries that have been discharged too far. Additionally, compatibility with all common battery types means the Prodigy 610 QUAD AC is an all in one solution for your battery management needs.
These features only scratch the surface of what the Prodigy 610 QUAD AC delivers. Pick one up and see for yourself why Protek R/C is found on the benches of some of the most respected R/C professionals in the world, including racer Atsushi Hara, pilot Tim Jones and more. The next generation has arrived. Don't get left behind.
Hi-Voltage Capable
This charger features a Hi-Voltage LiHV mode that allows you to safely charge Hi-Voltage LiHV capable batteries. You can adjust the charging end voltage of this mode up to 4.40V per cell, which is considerably higher than 4.20V per cell of an ordinary LiPo battery. Charging at this higher end voltage requires a Hi-Voltage LiHV capable battery, but the power gains are significant to the overall punch and power for the R/C model. But please note: battery voltages exceeding 4.20V per cell is prohibited from sanctioned racing rules, such as ROAR, IFMAR, etc.
Prodigy 610 QUAD AC Features:
Charger Model: Prodigy 610 QUAD AC
AC Input Voltage Range: AC 110V or 220V
DC Input Voltage Range: DC 11.0V - 18.0V
Charge Current Range: 0.1 - 10.0A
Discharge Current Range: 0.1 - 5.0A
Charge Power Limit: Max. 100W x2
Discharge Power Limit: Max. 20W x2
Balance Current: Max. 250mA
Balance Tolerance: ±0.01V
NiCd/NiMH Cell Count: 1 - 16 Cells
Lithium Battery Types: LiHV, LiPo, Li-Ion, LiFe
Lithium Battery Cell Count: 1 - 6 Cells
Pb Battery Voltage: 2 - 20V
Digital Power: 3 - 24V
Weight: 1250g
Dimensions: 208x170x63mm
NOTE: To determine if this charger is suitable for your application, you must perform this calculation to determine the maximum amp rate the charger can supply. Divide the Watts of the charger by the Voltage of the battery pack. This will tell you the maximum amp rate the charger can deliver (Watts / Voltage = Amps). So using the 612 QUAD AC as an example and a 6S LiPo battery pack, would be 100 Watts divided by 22.2 Volts, which equals 4.5 Amps. This means that the charger can supply a maximum of 4.5 amps to a 22.2 Volt 6S battery. This amp rate will gradually reduce as the battery voltage increases during the charge cycle.
IMPORTANT:
Includes:
NOTE: Included power cord is only compatible with Type B 110V outlets. "Type E/F" (PTK-5316), "Type G" (PTK-5317), and "Type I" (PTK-5318) power cords are available and must be purchased separately.
The EV Peak SD1 Duo LiHV/Lipo AC/DC Battery Charger is compatible with up to 6S LiPo batteries with a max charge of 30 Amps, and 500 Watts on DC input. Using the AC input, the SD1 still puts out an impressive 300W of power, per independent channel, allowing you to charge two different kinds of batteries at the same time.
Aside from the impressive charge rates, the SD1 features a brilliant touch-sensitive, full-color 4.7" LED screen, with a maximum resolution of 480dpi. Using the touch screen, you can easily and intuitively navigate the menu to check cell voltage, monitor charge status and set all parameters, plus much, much more.
Features:
Specifications:
DC input voltage: 11.0V-24.0V
AC input voltage: 100V-240V
Charge power DC input: 500Wx2
Charge Power AC input: 300Wx2
Discharge power: max.30W
Charge current: 0.1~30.0A
Discharge current: 0.1~30.0A
Regenerative discharge: 30.0A
Balance current: 400mA/cell
LiPo/Li-Ion/LiFe battery cell count: 1-6S
NiMH/NiCd battery cell count: 1-15cells
Pb battery voltage: 2V-24V
Weight: 2850g
Dimensions: 209x209x140mm
ADVERTISEMENT | ADVERTISE WITH US
ADVERTISEMENT | ADVERTISE WITH US
Recent comments