Bezerk RC carbon fiber option parts for B6 and B6D

ADVERTISEMENT | ADVERTISE WITH US

By Aaron Waldron
LiveRC.com

New from Bezerk RC:
www.bezerk.com.au

B6 / B6D Battery Strap Standard
#AE104, $29

Bezerk RC replacement for the AE B6 or B6D 2wd buggy. Made from 2.0mm carbon fiber with 4.0mm carbon fiber battery stops. Battery strap features rotatable battery stops to allow for down to a 2.5mm adjustment of the battery in the traverse position. Holes on the side are a course adjustment for a quicker movement of your battery location. An added feature is to be able to run your battery inline down the chassis by turning all the battery stops inward to hold the battery. Weighs approx 9 grams with steel screws. Like all Bezerk parts it can be customized to suit your needs. Includes four steel M3 x 6mm screws.

B6 / B6D Battery Strap, Saddles
#AE105, $32

Bezerk RC replacement for the AE B6 or B6D 2wd buggy. Made from 2.5mm carbon fiber with 4.0mm carbon fiber battery stops. Battery strap features rotatable battery stops to allow for down to a 2.5mm adjustment of the batteries. Holes on the side are a course adjustment for a quicker movement of your battery location. Weighs approx 11g with steel screws. Like all Bezerk parts it can be customized to suit your needs. Includes four steel M3 x 6mm screws.

B6 / B6D Front Tower, Flat Arm, Std
#AE405, $25

Bezerk RC direct replacement for the AE B6 or B6D front tower to suit the flat front arms. Made from 4.0mm glossy carbon fiber, the design adds material over the top edge to allow for some wear and material all around to add further strength.

B6 / B6D Front Tower, Flat arm, Half Hole
#AE406, $25

Bezerk RC direct replacement for the AE B6 or B6D front tower to suit the flat front arms. Made from 4.0mm glossy carbon fiber, the design adds material over the top edge to allow for some wear and material all around to add further strength. This tower features half hole spacing to fine tune your setup to a higher degree.

B6 / B6D Rear Tower, Std
#AE407, $28

Bezerk RC direct replacement for the AE B6 or B6D rear tower. Made from 4.0mm glossy carbon fiber, the design adds material all around to provide much more strength than the original.

B6 / B6D Rear Tower, Tall
#AE408, $28

Bezerk RC replacement for the AE B6 or B6D rear tower. Designed to allow the mounting of B5 / B5M length rear shocks, which in turn provides more travel for bumpier tracks. Made from 4.0mm glossy carbon fiber, the design adds material all around to provide much more strength than the original.