ADVERTISEMENT | ADVERTISE WITH US
ADVERTISEMENT | ADVERTISE WITH US
By Aaron Waldron
LiveRC.com
New from Jared Tebo Products:
www.jtprc.com
JTP RACE CARBON for the KYOSHO RT6 and SC6 Trucks.
RT6/SC6 Front Tower (#JTP1300, $30) : This front tower changes the whole front shock geometry and improves the steering feeling. The shock will be directly mounted to the arm and the tower design is drastically different than stock. These changes help with taking out the twitch and over aggressive front end and will give you more confidence in the corners. This shock tower is made from high quality 4mm carbon fiber.
RT6 F + R Arms (#JTP1301, $20) : These are the standard kit KYOSHO RT6 arms, they are just pre drilled for the JTP Front Tower. The new shock location is 49.5mm from the inside captured hinge pin screw hole.
SC6 F + R Arms (#JTP1302, $20): These are the standard kit KYOSHO SC6 arms, they are just pre drilled for the JTP Front Tower. The new shock location is 49.5mm from the inside captured hinge pin screw hole
RT6 Rear Tower (#JTP1303, $35) : This rear tower is the stock geometry with the inside 3 holes being available. You must use the KYOSHO RB6.6 rear bulkhead UM740 to use this shock tower. Your body mounting position will change as well. This shock tower is made from high quality 4mm carbon fiber.
RT6 Rear Bulkhead (#JTP1304, $10) : This is KYOSHO part number UM740 and is needed to use the JTP RT6 rear tower.
ADVERTISEMENT | ADVERTISE WITH US
ADVERTISEMENT | ADVERTISE WITH US
Recent comments