ADVERTISEMENT | ADVERTISE WITH US
ADVERTISEMENT | ADVERTISE WITH US
By Mike Garrison
LiveRC.com
Press Release from Schelle Racing:
www.schelleracing.com
Pre-Orders open now for both Blue and Black Anodize Schelle B64 Aluminum Hubs. Estimated shipping date is May 22.
Schelle broke new ground with the 1/10th 2-piece hub concept on the B5 series. Now, the best hubs on the market are available for the B64 and B64D. The 2-piece design with replaceable caps increases adjustment and durability. The Schelle B64 hubs fit the kit axle height inserts for 0, +1, +2, and +3 adjustability. The standard location "inside, +1mm shim" matches the kit standard upper row middle "B" hole. The upper cap design can space away from the main hub with ballstud shims, allowing racers fine “in-between” adjustments for the rear upper link. True to the kit geometry, the Schelle aluminum hubs are 0 degree toe-in when using the Associated inserts. The SCH1095 aluminum upper caps carry over from the B6 design, and are shared the same part left and right. The upper cap design reduces leverage on the outer ballstud, and is much easier to use when needing to remove a broken ballstud. Lastly, these hubs are zero slop, with plastic bearing inserts and 2 set screws for the hinge pin.
B64 Aluminum Hub Features:
*1mm shim and ballstud not inlucded
ADVERTISEMENT | ADVERTISE WITH US
ADVERTISEMENT | ADVERTISE WITH US
Recent comments