LiveRC Menu

ADVERTISEMENT | ADVERTISE WITH US

Tekno RC puts its shock boots and spring perches on lock down

New Products

ADVERTISEMENT | ADVERTISE WITH US


Main Photo: Tekno RC puts its shock boots and spring perches on lock down 12/9/2014
By Aaron Waldron
LiveRC.com
 
New from Tekno RC:
 
Locking Shock Rod Ends and Spring Perch Set (EB/NB/ET/NT/SCT)
 
 
Never lose a shock spring again with these locking shock spring perches and rod ends. The all new design that mates up perfectly with our durable new captured shock boots (TKR6143, TKR6144, TKR6145) will ensure your suspension stays consistent throughout any race or run. The spring perches rest on a shelf around the rod end instead of directly on top of the rod end. The result is less interference from the shock boot and absolutely no sacrifice in up travel. Each spring perch / rod end is secured by an M3x10mm set screw (TKR1605).
 
NOTE: Requires the use of captured shock boots (TKR6143, TKR6144, TKR6145). Shock boots should be installed before the rod ends are attached to the shock shaft.
 
Features:
  • Locking design ensures you never pop or lose a spring.
  • No sacrifice in suspension up travel.
  • More consistent suspension action.
  • Durable composite construction.
  • Compatible with EB/NB/ET/NT/SCT Tekno RC vehicles.
Part #: TKR6140
Desc: Locking Shock Rod Ends and Spring Perch Set (EB/NB/ET/NT/SCT)
MSRP: $11.99
 
 
The captured design of these shock boots will result in fewer ripped or torn boots while providing superior protection from dirt and debris. They will keep your suspension system free and consistent without sacrificing any suspension up travel. They are a perfect length fit for their respective shock lengths and won't be caught or pinched in between the spring perch and rod end during installation. The boots require the locking spring perches and rod ends (TKR6140) and should be installed before attaching the shock rod end to the shock shaft.
 
Features:
  • Superior protection from dirt and debris.
  • No sacrifice in suspension up travel or performance.
  • More durable than traditional shock boots.
  • Easier installation of spring and perch vs. traditional shock boots.
NOTE: Requires locking spring perches and rod ends (TKR6140)
 
COMPATIBILITY:
EB/NB/SCT410 Front -> TKR6143
EB/NB/SCT410 Rear -> TKR6144
ET/NT Front -> TKR6144
ET/NT Rear -> TKR6145
 
Part #'s: TKR6143, TKR6144, TKR6145
Desc: TKR6143 - Shock Boots (medium length, front, 2pcs, EB/NB/SCT)
TKR6144 - Shock Boots (long length, rear EB/NB/SCT, front ET/NT, 2pcs)
TKR6145 - Shock Boots (XL length, rear ET/NT, 2pcs)
MSRP: $4.99
 
M3x10mm Set Screws (black, 10pcs)
 
 
These are used to secure the locking spring perch and rod ends (TKR6140) and can also be used anywhere an M3x10mm set screw is required.
 
Part #: TKR1605
Desc: M3x10mm Set Screws (black, 10pcs)
MSRP: $3.99
Share:
blog comments powered by Disqus

ADVERTISEMENT | ADVERTISE WITH US