MIP's all-in-one Eco box set aluminum tranny for B5M and T5M

ADVERTISEMENT | ADVERTISE WITH US

By Aaron Waldron
LiveRC.com

Press release from MIP:
www.miponline.com

#14300 MIP Eco All-In-1 Box Set, AE B5M, T5M Trans
MSRP: $150.00 

PRODUCT DESCRIPTION:

From the first rendition of the MIP Box comes an awesome running change in the form of the MIP Eco All-In-1 Box that accommodates all current AE and MIP top shafts on the market for the B5M, T5M platforms. This means that whichever top shaft your AE 5th generation vehicle comes with will work with MIP’s Eco All-In-1 Box. What makes the MIP Eco All-In-1 Box better than all the rest? Well other than it being compatible with whatever top shaft you may choose, it also bridges that gap and gives your mid motor vehicle all the benefits of the rear motor car but less drag and more initial punch with one less idler gear. The all-aluminum construct offers a huge advantage pertaining to more precise internal gear mesh, less overall heat, and stiffer bracing, better bearing seats and over 10% of the gear box weight reduced from the original box. Check out all the competitive advantages below to solidify why the Eco Box is the ultimate 3-gear transmission for your AE B5M/Light, and T5M?

TARGET CUSTOMERS:

Team Associated B5M & T5M Owners

COMPETITIVE ADVANTAGES:

• Machined cases offer higher precision which optimizes gear mesh and efficiency when compared to molded plastic cases
• Aluminum construct acts as a giant heat sink which will cool the motor offering more consistent power due to reduced fade (less heat more power).
• Aluminum construct will offer stiffer bracing over plastic OEM case.
• Aluminum 3-gear MIP Transmission package is relatively the same overall weight as OEM 4-gear transmission. This will keep the weight distribution the same as what the car was designed to have. (MIP BOX 5.5 grams heavier)
• Motor offset 3mm to the right to optimize left to right weight distribution and balance (small spacer and new spring provided to accommodate this feature)
• Less drag than a four gear transmission design (one less idler gear).
• Can incorporate 5mm or 6mm I.D. bearings on top shaft
• 50% lighter gear cover over stock
• 7075 Aluminum 
• Made 100% in the USA
• Race Proven
  - TQ/1st CRCRC Midwest Champs 2015 Stock Buggy
  - TQ/1st JC Nationals RC Excitement 2014

FEATURES:

100% Made in the USA

INCLUDES:

MIP Confetti Sticker (2), MIP Inst. Sheet Box Set (1), Spring Slipper Spring (1), MIP Bearing, 5x12x4mm (1), MIP Top Shaft Spacer 4mmx6mmx3mm (1), MIP Bearing Support Ring (1), .125 x .187 x .031 Nylon Washer (2), MIP Gear Cover Cap Plug 7/16” (1), MIP 3 Gear Box Cover (1), MIP 3 Gear Box Right (1), MIP 3 Gear Box Left (1), MIP 3 Gear Motor Blue Plate (1) 

REQUIRES:

2.0mm Allen Key- (Suggest - #9008 MIP Hex Driver Wrench 2.0mm)

Stock Team Associated idler gear, diff gear, and either stock or aftermarket aluminum top shaft (Suggest - #15080 MIP 17.5 Eco All-In-1 Topshaft, All AE B5/T5M). 

COMPATIBILITY:

RC10B5M Team Kit - #90003, Factory Lite - #90000 (replaces Gear Box #91530, #91607, #91552, #91424), RC10T5M Truck Kit #70001

SUPPORT PRODUCTS:

#14301 MIP Box Gear Cover, AE B5M Trans 

#14302 MIP Box Motor Plate, Blue, AE B5M Trans (1)

#14303 MIP Box, Left, AE B5M Trans (1)

#14304 MIP Box, Right, AE B5M Trans (1)

#14305 MIP Eco All-In-1 Box Motor Plate, Black, AE B5M, T5M Trans (1)

#99085 HW-Washer, .125 x .187 x .031 Nylon (4)

#99093 HW-Plug, 7/16 Cap Plug (4)

#99094 HW-Spring, Slipper Spring (1)

#99095 HW-Spacer, 4mmx6mmx3mm Alum. Spacer (2)

#99097 HW-Bearing, 5x12x4mm (1)

#99098 HW-Bearing Support Ring, 10x12x2mm