ADVERTISEMENT | ADVERTISE WITH US
ADVERTISEMENT | ADVERTISE WITH US
By Aaron Waldron
LiveRC.com
New from MIP:
www.miponline.com
MIP 17mm Hex Adapter Kit, Standard Offset, TLR SCTE (4)
#16150, $35
Have you ever wanted to go bigger on tire size? Do you constantly blow up your shortcourse tires because of too much power? Do you want less tire growth for putting down speed runs with your SCTE? Well today you can do all those things by stepping out of the shortcourse tire arena and entering the 1/8th scale tire realm with MIP’s 17mm SCTE adapter kit! Made out of high quality 7075-T6 Aluminum this kit will allow 17mm wheels to be used on your SCTE 1.0, 2.0, & 3.0 and any other variation of the SCTE platform that uses the same axle and hub setup. These adapters have been run flawlessly on MIP’s Pro8 Kit for a few years now, so you can rest assured they’ve been tested under 4s conditions! Get what your overpowered SCTE needs, 17mm adapters! Support American manufacturing; support MIP, Go 100% USA!
TARGET CUSTOMERS:
COMPETITIVE ADVANTAGES:
FEATURES:
INCLUDES:
MIP Confetti Sticker (2), 4-40x3/32 Cup point SHSS (4), MIP Front 17mm Hub 1/8th Super Lite (4), MIP Front M4 Serrated 17mm Flanged Nut (4),
REQUIRES:
COMPATIBILITY:
Disclaimer: Some 17mm wheel hex dimensions vary between manufactures. In the case of a wheel not easily installed on MIP's 17mm adapters a slight modification to the wheel hex may be needed. The modification that is needed is a small chamfer around the leading edge of the plastic hex. At a 45 degree angle use a sharp xacto/hobby knife, to chamfer that edge on all sides of the hex (view instructional photo). The wheel should now slip on much easier.
ADVERTISEMENT | ADVERTISE WITH US
ADVERTISEMENT | ADVERTISE WITH US
Recent comments