MRO Racing announces new INSPIRE4 1/10-scale 4wd buggy

0 Sept. 20, 2018, 9:27 a.m.

Main Photo: MRO Racing announces new INSPIRE4 1/10-scale 4wd buggy

By Mike Garrison
LiveRC.com

MRO Racing has announced the INSPIRE4 1/10-scale 4wd buggy kit, in which they aim to release in late-2019. The new buggy is based around a unique inboard suspension system with a list of eye-catching specs and features.

Features shared by MRO Racing:

Quick diff height adjustment, just loosen 3 screws on the chassis and slide a shim under the gearbox also easy to remove the whole diff case with the same 3 screws without affecting any of the suspension .
Quick diff change without the need to remove the whole diff case or affecting any of the suspension.
Low diffs front and rear.
Left-right, front-rear wishbone are all the same.
Adjustable wishbone flex
Front and rear bulkheads are the same
INSPIRE4 has the lowest CG of any other rc buggy on the market.
Adjustable front kick up and caster.
Adjustable anti-squat plus the option to run pro-squat.
Inboard suspension design with the dampers mounted as low as possible.
Easy adjustable rocker ratio.
Unique to the “INSPIRE4” a cross over quad rocker rear suspension system.
Suspension geometry designed from scratch.
Quick release spur gear.
Chassis layout to achieve a 50/50 weight distribution (depending on electronics).
Adjustable chassis flex
Large angled side pods to increase ground clearance when the chassis rolls through the corners and decrease the chances of chassis rub.
Flat aluminium chassis design
No shock towers to disturb the air flow to the wings and body shell.
CFD software used when designing the car.
Minimal weight passed the front and rear axles.
Wings mount perfectly over the centre line of the axles.