LiveRC Menu

ADVERTISEMENT | ADVERTISE WITH US

New Avid RC D8 Worlds Spec Carbon and G10 Arm Inserts

New Products

ADVERTISEMENT | ADVERTISE WITH US


AV1844.jpeg

Press Release From Avid RC:
www.avidrc.com

HB D8 Worlds Spec 1.5mm Carbon Arm Inserts for the front offer your buggy another great tuning feature by reducing the flex and twist in the arm. Because the arm is now symmetrical (left and right arm are the same), it has two locations for an arm insert (top & bottom) and the arms do not come with plastic covers anymore. We recommend running the carbon insert on the top of the arm and our G10 insert on the bottom to keep the dirt out of the arm while not making the arm too stiff.

Tips

  • These fit tight but will go in by pressing them with your fingers. To get them out try bending the arm some to pop it out. 

Details

  • 100% Carbon Fiber, 1.5mm thick.
  • Use as a tuning aid. Will greatly reduce arm flex and twist, making the car more responsive on that end. A common setting is to run them just in the front or just the rear to dial in the feel of your buggy.
  • Includes (2) 1.5mm front carbon arm inserts (left and right are interchangeable) and (14) stainless steel installation screws.
  • Fits: HB cars using the new D8 World Spec (Evo) arms.

HB D8 World Spec 1.5mm Carbon Arm Inserts for the rear offer your buggy another great tuning feature by reducing the flex and twist in the arm. Because the arm is now symmetrical (left and right arm are the same), it has two locations for an arm insert and the arms do not come with plastic covers anymore. We recommend running this carbon insert on the top of the arm and our G10 insert on the bottom to keep the dirt out of the arm while not making the arm too stiff.

Tips

  • These fit tight but will go in by pressing them with your fingers. To get them out try bending the arm some to pop it out. 

Details

  • 100% Carbon Fiber, 1.5mm thick.
  • Use as a tuning aid. Will greatly reduce arm flex and twist, making the car more responsive on that end. A common setting is to run them just in the front or just the rear to dial in the feel of your buggy.
  • Includes (2) 1.5mm rear carbon arm inserts (left and right are interchangeable) and (14) stainless steel installation screws.
  • Fits: HB cars using the new D8 World Spec (Evo) arms.
blog comments powered by Disqus

ADVERTISEMENT | ADVERTISE WITH US

About the Author

Tyler Hooks is a recent college graduate with a BBA in management and a Minor in Communications from St. Edwards University as well as a ROAR Stock National Champion and was apart of the IFMAR World Championship USA team in 2016. Tyler is currently an Editor as well as in the Advertising department at Live Race Media and frequently is apart of the broadcast team at major events.

Recent comments

ADVERTISEMENT | ADVERTISE WITH US