New AVID titanium shock standoffs and lower shock screws, aluminum rear center diff mount for EB410

0 Jan. 31, 2018, 3:28 p.m.

By Aaron Waldron
LiveRC.com

New from AVID Racing Concepts:
www.avidrc.com

EB410 Titanium Shock Standoffs | FastTune | 4pca
#AV1087. $35
Available now

The Tekno EB410 Titanium Shock Standoffs include Avid's FastTune feature which allows you to use a common 1.5mm Allen wrench to prevent the standoff from spinning while using a 5.5mm socket wrench on the other side. The other solutions out there require you to either take the shock completely off the standoff to reach the 7.0mm nut or to use a 7.0mm open-ended socket wrench (which isn't very common in our tool selections). Don't forget, you also get to lose some weight from the highest point on the car by switching from steel to titanium.

Features

Machined from billet 6Al-4V Titanium.
Designed for the Tekno EB410.
Features our FastTune design that uses a 1.5mm Allen to aid in switching shock locations.
Stock replacement.
Remove weight from the highest location on your vehicle, weighs 1.07g/ea.
Includes 4 standoffs in a touring spring doodad container.

EB410 Titanium Lower Shock Screws | Set
|#AV1088, $22
Available now

Our EB410 Titanium Lower Shock Screws are an excellent upgrade for your Tekno vehicle. This screw set offers 2 left and 2 right hand threaded screws with a 5.5mm socket head so you only need to grab one wrench when taking your shocks off. As if that wasn't enough already, we also included the Avid innovated center-drilled hole for easy docking of your calipers while measuring your shock lengths.

Tips

Two of these screws are Left Hand Threaded so you screw them in by turning your wrench counter-clockwise. If you place your car on your pit table in front of you and you have the front end facing you, you put the left hand threaded screw in the left arm. If you spin the car around so the rear is facing you, you put the left hand threaded screw in the left arm. The reason for this is because the action of the arm going up and down places enough leverage on the screw that it can unscrew itself.

Features

Machined from billet 6Al-4V Titanium.
2 Right-hand, 2 Left-hand threaded screws. The Left-hand threaded screws are laser etched with an “L”.
Center-drilled to locate calipers for precise shock length and droop measurements.
Use the same 5.5mm hex driver for shock tops and bottom mounts.
Lose weight and add "bling" over the kit steel screws (0.8g/ea).
Each package includes 4 lower shock mount screws (2 LH, 2 RH) and 1 AVID mini decal sheet.

EB410 Aluminum Center Diff Mount | Rear
#AV1089, $16
Available now

The Tekno EB410 Aluminum Center Diff Mount is designed to help prevent stripped spur gears that were due to the rear plastic diff mount twisting under power.

Features

7075-T6 Aluminum, black anodized, silver chamfer edging, and the Avid logo laser etched.
Designed for the Tekno EB410.
Stock replacement.
Includes 1 aluminum center diff mount for the rear.