New Infinity IF14-2 C-Hubs and Aluminum/Titanium Accessories

Press Release From Infinity:
www.creationmodel.net/infinity/

Infinity has released new C-Hubs for the IF14-2 as well as titanium and aluminum screw sets as well as titanium rod ends and more.

T332

C-HUB SET (-1.0mm/4deg.)

C-hub for the IF14-2 platform that allows the upper arm mounting height to be 1mm lower than before. To achieve the same setup as the conventional C-hub (T011), add 1.0mm spacer under the 4.9mm ball end.

T333

STEERING BLOCK BUSHING (-1.0mm/2pcs)

Steering block bushing to be used in combination with T332 C hub set (-1.0mm/4 degrees).

Used on the upper side of T332.

T334

IF14-2TE ALUMINUM and TITANIUM SCREW SET (Red/84pcs)

Titanium and aluminum screw set (84 screws in total). Titanium is used on the underside of the chassis where strength is required. Aluminum screws are used on the upper surface of the chassis to reduce weight and lower the center of gravity. The use of aluminum screws also optimizes the rigidity balance and flex characteristics of the entire chassis.

T335

TITANIUM BALL END 4.9mm SET (IF14-2 Team Edition/20pcs)

This is a new set of super strong and high-precision 4.9mm titanium ball ends for the IF14-2 Team Edition. Each set is about 8g lighter than the steel ones and the polished ball surface ensures the ball end moves smoothly for a long time.

T336

ALU TOP DECK BRIDGE HOLDER -FLEX

Spare part for T243