New Sworkz S35-GT2 GT On-Road Kit

Press release From Sworkz:
www.sworkz.com

Based on the world champion platform SWORKz S35-GT, SWORKz has further developed. The result is the S35-GT2 and the S35-GT2E, which are improved in many ways. The S35-GT2 is designed as a thoroughbred racing machine for GT Onroad Racing. It has a brand new design of the unique front and rear suspension. The Ackerman steering geometry was adopted from the 1/8 S35-4 buggy. The 2-speed transmission has also been completely revised on the S35-GT2 platform and significantly improved compared to its predecessor.

The S35-GT2 has a weight-optimized, hard anodized base plate made of high-strength T7075 aluminum. The wide layout of the rear axle, developed in numerous tests by our works drivers, is also used on the S35-GT2. The HET differentials developed by SWORKz are also included in the kit and offer traction that is not possible with other systems. The new S35-GT2 has a flat front and rear shock absorber arrangement. The shock absorbers have been optimized for this new arrangement. The steering geometry of the S35-GT2 gives the driver total control over the S35-GT2. The wishbone brackets, included with square inserts, allow the axle geometry of your SWORKz S35-GT2 to be adapted to any track layout. The front and rear wishbones are made of a newly developed composite material. The side pans have also been redesigned. Another new development in the SWORKz S35-GT2 is the completely new rear steering knuckle. Composite material combined with carbon plates offers you the possibility for different setups.

The newly developed composite material works perfectly with the HET differentials for maximum traction. There are many other changes and ideas in the SWORKz S35-GT2 that make the car a real winner. The philosophy of SWORKz vehicles is that top pilots can adapt their setup to each route, but hobby pilots can also find a standard setup that makes them faster on a wide variety of routes. And the SWORKz S35-GT2 has these two properties to perfection. When designing the vehicle, the SWORKz development team focused on using materials that meet the highest quality standards. The S35-GT2 kit only contains 100% SWORKz quality. Congratulations on purchasing the new SWORKz S35-GT2 Pro kit. Thank you for your trust in SWORKz.

FEATURES

New weight-optimized, hard anodized T7075 base plate
New wide chassis design
New front & rear shock mount
New shock absorber caps
New 3mm optimized rear shock mount
New Ackerman steering plate
New steering system
New servo saver aluminum part
New lockable servo saver nut
New servo saver locking design
New steering balls
New steering knuckle plates
New updated wishbone bracket with square inserts
New side pans
New lower wishbones front & rear
New upper wishbone front
New composite steering knuckle at the rear with carbon plates
New multi-adjustable linkage system for the rear upper wishbones
New anti-lock screws for shock absorbers
HET differentials front & rear included
New 2-speed gearbox
2 front chassis struts included
More balance weight positions
Stronger downstop area
Optimized composite aluminum parts in T7075

Specification:
Length：490mm
Width：308mm
Height：145mm
Ground Clearance：15mm
Wheelbase：325-330mm

Track：F:302mm /R306mm
Gear Ratio:C:57/61,18/23T, F/R 43/13T
Weight：3450g