TLR 22 and Kyosho ZX-5 Bulldog

0 May 18, 2011, 8:14 a.m.

This is a BullDog Rear Motor Configuration Clear Body for the Losi 22 1:10 Buggy. Pro-Line is proud to introduce the first No-Compromise racing body for the Losi 22 buggy in the rear motor configuration. To date, all of the bodies made for this car have sacrificed looks and performance due to the dual motor configuration. If you race primarily in the rear motor configuration, Pro-Line’s new BullDog for the Losi 22 is THE ONLY body to have. On and off the track you will appreciate Pro-Line’s No-Compromise approach. The advanced aerodynamic properties and styling will improve your buggies performance and turn heads. If you want uncompromising performance, you need Pro-Line’s new BullDog Rear Motor Configuration Clear Body for the Losi 22!

NOTE: This body requires the use of Speed Controls measuring at or below 1.6”L x 1.6”W x 0.65”H (40.5mm L x 40.5mm W x 17mm H). Some examples are the Tekin RS, the LRP SXX and the Viper VTX10R. If you have a Novak speed control, you must use the #3359-00 Mid Motor Configuration BullDog body and cut it for either mid or rear motor for proper clearance.

Features:

Advanced cab forward design generates unmatched off-power steering
Low profile rear deck feeds wing with clean air flow
Made from durable / genuine Lexan®
Super-low styling giving your Losi 22 the lowest center of gravity (CG) possible
Fabricated to fit snugly around each chassis component
Four step to Race Ready:

1.) Clean Body and apply included window mask
2.) Paint then peel the over-spray film off
3.) Sticker your body (decal sheet included)
4.) Mount your new BullDog onto your 22

Made in the USA, since 1982

What's Included:

Clear BullDog Body (1pc)
Rear Wing (2pcs)
Decal sheet (1pc)
Window mask (1pc)

358-00 | BullDog Losi 22 Rear Motor Configuration

This is a BullDog Mid Motor Configuration Clear Body for the Losi 22 1:10 Buggy. Pro-Line is proud to introduce the first No-Compromise racing body for the Losi 22 buggy in the mid motor configuration. To date, all of the bodies made for this car have sacrificed looks and performance due to the dual motor configuration. If you race primarily in the mid motor configuration (this body can also be cut and used in the rear motor configuration for large speed controls), Pro-Line’s new BullDog for the Losi 22 is THE ONLY body to have. Pro-Line’s new mid motor body features a large scoop to maximize clearance and air flow to your motor and electronics. The advanced aerodynamic properties and cab-forward styling will improve your buggies performance and turn heads. If you want uncompromising performance, you need Pro-Line’s new BullDog Mid Motor Configuration Clear Body for the Losi 22!

NOTE: This body can be cut and used in the rear motor configuration to allow large speed controls measuring above 1.6”L x 1.6”W x 0.65”H (40.5mm L x 40.5mm W x 17mm H). This includes all Novak speed controls.

Features:

Advanced cab forward design generates unmatched off-power steering
Low profile rear deck feeds wing with clean air flow
Made from durable / genuine Lexan®
Super-low styling giving your Losi 22 the lowest center of gravity (CG) possible
Fabricated to fit snugly around each chassis component
Four step to Race Ready:

1.) Clean Body and apply included window mask
2.) Paint then peel the over-spray film off
3.) Sticker your body (decal sheet included)
4.) Mount your new BullDog onto your 22

Made in the USA, since 1982

What's Included:

Clear BullDog Body (1pc)
Rear Wing (2pcs)
Decal sheet (1pc)
Window mask (1pc)

3359-00 | BullDog Losi 22 Mid Motor Configuration

This is the Pro-Line BullDog Clear Body for the Kyosho ZX-5 1:10 4WD buggy. Pro-Line has made waves in the RC industry because of the superior handling and aggressive styling of the BullDog line of bodies. Some BullDog bodies have even been considered an unfair advantage due to the huge performance gains. Now Kyosho fans can celebrate because Pro-Line is bringing this race proven technology straight to the ZX-5! This body has been designed specifically to fit the Kyosho buggy chassis and still provides the unmatched performance characteristics that define Pro-Line’s BullDog body line.

Features:

Advanced cab forward design generates unmatched off-power steering
Low profile rear deck feeds wing with clean air flow
Made from durable / genuine Lexan®
Fabricated to fit snugly around each chassis component
Four step to Race Ready:

1.) Clean Body and apply included window mask
2.) Paint then peel the over-spray film off
3.) Sticker your body (decal sheet included)
4.) Mount your new BullDog onto your ZX5