ADVERTISEMENT | ADVERTISE WITH US
0
March 26, 2015, 12:54 a.m.
By Aaron Waldron
LiveRC.com
New from Scorpion Power Systems:
Scorpion Power System’s first surface-specific speed controllers, called Vanguard, are offered with either stock or modified specs tucked inside a small case with integrated gold heatsink. Both are compatible with 1-3S LiPo packs and have 6V/3A BECs, support both censored and sensorless motors, can be fitted with accessories like cooling fans and booster/capacitor boards, and can be connected via USB to a PC interface for fine-tuning.
Scorpion Vanguard S3-80 Super Stock Kit Set, #S3_80_set
Specifications:
Cont./ Brust Current, *A: 80/400A
Motor Type Supported: Sensored and Sensorless Brushless Motor
Cars applicable: 1/8th & 1/10th on road and off road
Motor Limit: >= 8.5T
Resistance: 0.0004Ohm*2
Voltage Input: 1s-3s LiPo
BEC: 6V@3A DC-DC
Footprint: 30,6 mm (W) x 35,6 mm (L)
Size (w/o FAN): 35.8 x 35.6 x 21.8 mm
Weight: 40g
FAN: 6V@0.2A
External Programming Port Output: 2
* Burst current rating according to MOS FET specification
Features:
- Build with military specification component.
- Wide input voltage range 3-14V (1S-3S Lipo)
- Sensored and Sensorless brushless motors (BLDC)
- Drive down to 8.5T motor (Scorpion Vanguard S3-80)
- High current, up to 80A continues current, with current protection. (Scorpion Vanguard S3-80 Super Stock Kit Set)
- Factory driver suggested setting
- Profession PC program
- Logging, store up to 8,000 records of system parameters
- Aluminum heat sink
- Build-in temperature sensor with adjustable temperature protection.
- True DC-DC 3 A/6V BEC for servo and receiver
- Multiple protection
- Adjustable Voltage control and protection(cutoff, motor stop) with LiPo AutoDetect mode.
- Motor over temperature protection (for Scorpion RS-3420 motor)
- 2 x hall sensor connectors, each can be used for PC connection either..
- Flexible adjustment
- Wide range of settings for different purpose and race course
Scorpion Vanguard S3-140 Modify Kit Set, #S3_140_set
Specifications:
Cont./ Brust Current *A: 140/800A
Motor Type Supported: Sensored and Sensorless Brushless Motor
Cars applicable: 1/8th & 1/10th on road and off road
Motor Limit: >= 4.5T
Resistance: 0.0004Ohm*2
Voltage Input: 1s-3s LiPo
BEC: 6V@3A DC-DC
Footprint: 30,6 mm (W) x 35,6 mm (L)
Size (w/o FAN): 35.8 x 35.6 x 21.8 mm
Weight: 40g
FAN: 6V@0.2A
External Programming Port Output: 2
* Burst current rating according to MOS FET specification
Features:
- Build with military specification component.
- Wide input voltage range 3-14V (1S-3S Lipo)
- Sensored and Sensorless brushless motors (BLDC)
- Drive down to 4.5T motor (Scorpion Vanguard S3-140)
- High current, up to 140A continues current, with current protection. (Scorpion Vanguard S3-140 Modify Kit Set)
- Factory driver suggested setting
- Profession PC program
- Logging, store up to 8,000 records of system parameters
- Aluminum heat sink
- Build-in temperature sensor with adjustable temperature protection.
- True DC-DC 3 A/6V BEC for servo and receiver
- Multiple protection
- Adjustable Voltage control and protection(cutoff, motor stop) with LiPo AutoDetect mode.
- Motor over temperature protection (for Scorpion RS-3420 motor)
- 2 x hall sensor connectors, each can be used for PC connection either..
- Flexible adjustment
- Wide range of settings for different purpose and race course
Recent comments